The Divesoft Quick Release Buckle (QRF) is designed to join standard { 2 in | 5.1 cm } nylon webbing together; providing reliable durability and corrosion resistance in harsh environments.

Once threaded through the slots on each portion of the buckle, the nylon straps may be easily mated by simply pressing the two sides together or un-clipped by depressing both sides of the buckle levers at the same time. This feature helps to prevent accidental unbuckling when in use. The placement of the levers on the sides of the buckle reduces the probability of them being accidentally lifted by another part of your gear. All edges of the buckles and parts are all rounded and polished to avoid any damage to the nylon straps. All buckle component parts are made from stainless steel for durability and corrosion resistance.

The active part of the buckle (the one with the levers) is attached to the strap by threading through and sewing (or with a belt slide if secure enough for your intended use). The levers are designed so that they can be easily manipulated even with heavy drygloves.

The passive part is attached by threading through, to make any adjustments or changes in the length of the strap possible. Two passive threading parts are available: a three (3) slot design and an adjustable design. The three slot design works similar to a standard scuba waist buckle and allows for a secure connection. The adjustable design enables the tightening of the attached strap by simply pulling on the loose end.

NOTE: The QRF buckle is not to be used for climbing, skydiving or in any other way where its use could pose a risk to one’s life. The QRF buckle was designed for attaching straps of diving harnesses and its construction is not appropriate for climbing or skydiving applications.